ERRORS AND TROUBLESHOOTING

 

No Power to LCD Screen

 

Solution 1

 

Check the connection between the DuraLite Kit and the controller, and the controller and the battery. The controller requires a minimum voltage of 8v to run.

 

Solution 2

 

Your battery may be too far discharged to accommodate the controller. Keep the solar kit plugged in and placed in full sun for a few hours and try the controller again.

 

 

Solution

 

This is an Overvoltage Error. The battery voltage is too high. Disconnect the DuraLite kit and plug in a power draw to lessen the voltage in the battery

 

 

Solution

 

This is an Over Discharge Error. The battery voltage is too low. Connect the DuraLite kit to charge the battery.