The GP-PWM-10 or GP-PWM-30 is included in all Go Power! RV Solar Kits detailed in this manual except for the expansion kits (50E and 100E).  The GP-PWM provides the necessary protection for the RV battery system.  A condensed version of the installation instructions appear in this manual.  However, please read the full installation manual included with the GP-PWM-10 or GP-PWM-30 Solar Charge Controller or visit gpelectric.com for more product information and manuals.

1. Plan where the Solar Charge controller will mount, see Figure 3-B.

NOTE:

• The Solar Charge Controller is designed to be mounted vertically in an indoor location inside a weatherproof enclosure. 
• Ideally the Solar Charge Controller should be located so it can be easily seen for monitoring system operation.
• The location will need access to the cable ends from the solar panels and the battery compartment.

WARNING: Failure to secure the Solar Charge Controller could cause it to become dislodged while the RV is in transit and cause severe damage to the unit and/or the RV.