You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Inverter Support > Pure Sine Wave Inverter Support > GPSW Inverter 150-300: Troubleshooting
GPSW Inverter 150-300: Troubleshooting
print icon

How to troubleshoot a GPSW Inverter 150-300

 

Television Interference

 

Operation of the inverter can interfere with television reception on some channels. If this situation occurs, the following steps may help to alleviate the problem.

  • Ensure that the chassis ground lug on the back of the inverter is securely connected to the ground system of your vehicle, boat, or home.
  • Do not operate high power loads with the inverter while watching television.
  • Make sure that the antenna feeding your television provides an adequate ("snow free") signal and that you are using a good quality cable between the antenna and the TV.
  • Move the television as far away from the inverter as possible.
  • Keep the cables between the battery and the inverter as short as possible and twist them together with about 2 to 3 twists per foot. This minimizes radiated interference from the cables.

 

Troubleshooting Guide - Common Problems

 

 

Products covered in this article: GPSW-150, GPSW-300

Feedback
0 out of 1 found this helpful

scroll to top icon