No Power to LCD Screen

Solution 1

Check the connection between the DuraLite Kit and the controller, and the controller and the battery. The controller requires a minimum voltage of 8v to run.

Solution 2

Your battery may be too far discharged to accommodate the controller. Keep the solar kit plugged in and placed in full sun for a few hours and try the controller again.

FLASHING

Solution

This is an Overvoltage Error. The battery voltage is too high. Disconnect the DuraLite kit and plug in a power draw to lessen the voltage in the battery.

FLASHING

Solution

This is an Over Discharge Error. The battery voltage is too low. Connect the DuraLite kit to charge the battery.