Feb 24, 2020
1. Plan where the Cable Entry Plate(s) (CEP) will be located on the RV roof.
- Make sure it is within reach of the solar panels. It may be necessary to use the included extension cables to reach the CEP(s). If required, longer extension cables can be purchased. Please contact your dealer to purchase.
- Make sure the CEP location(s) is also accessible from the interior of the RV to route the cables to the charge controller.
- The GP-MPPT-40 charge controller(s) should be placed no more than 25’ from the CEP(s). Closer is better to reduce the voltage loss due to resistance.