Plan where the GP-MPPT-PRO-60 charge controller(s) will mount, see Figure 3-A for more detail including maximum distances. 

NOTE:

• The GP-MPPT-PRO-60 is designed to be mounted vertically in an indoor location inside a weatherproof enclosure. 
• The GP-MPPT-PRO-60 weighs approximately 7.9lbs. – ensure the mounting location will hold this weight.
• The location will need access to the cables ends from the CEP, the battery compartment and the GP-MPPT-PRO-R remote cable.
• The SOLAR-AE6 includes a second GP-MPPT-PRO-60 to be connected in parallelization mode to allow for 80A charging.

WARNING:

Failure to secure the GP-MPPT-PRO-60 could cause it to become dislodged while the RV is underway and cause severe damage to the unit and/or the RV.