Go Power warrants the GP-MPPT-PRO-60 for a period of five (5) years from the date of shipment from its factory. This warranty is valid against defects in materials and workmanship for the five (5) year warranty period. It is not valid against defects resulting from, but not limited to: • Misuse and/or abuse, negle…
TOOLS AND MATERIALS NEEDED • Screwdriver. • Multimeter. Note. If the solar controller was purchased with a Go Power! RV Solar Power Kit the UV resistant wire is included. For instructions regarding the Go Power! RV Solar Power Kit installation, please refer to the installation guide provided with the kit IN…
FEATURES • Advanced multi-peak tracking technology. When the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point • Built-in maximum power point tracking (MPPT) algorithm significantly increases en…
Product Dimensions
LED Indication Chart
DIAGRAM
HOW TO CHANGE THE RV-C INSTANCE NUMBER The instance of the solar controller on the RV-C network can be configured using the SET button and LEDs. Up to 5 unique instances are supported. To change the instance follow these steps: 1. Hold the SET button down for approximately 3 seconds until one of the LEDs starts f…
Specifications
INSTANCE NUMBER IDENTIFICATION The RV-C instance of an individual controller can be identified by the 5 LEDs on the controller shown below.
Explanatory Video When unboxing a GP-MPPT-40 Solar Controller, you receive: the controller itself a short length of cat 5 cable (to be used if you're hooking two units in parallel) a battery temperature sensor This video will show you the different positions of the Dip Switch on the MPPT 40 amp Solar Cont…