Overview & Specifications Overview A Solar Controller (or Charge Controller / Regulator) is an essential component of your photovoltaic solar system. The Controller maintains the life of the battery by protecting it from overcharging. When your batteries have reached a 100% state of charge, the Controller preve…
Safety Instructions These are important instructions for model GP-MPPT-85/20 that should be followed during installation and maintenance of the GP-MPPT-85/20. Disconnect all power sources Electricity can be very dangerous. Installation should be performed only by a licensed electrician or qualified personnel…
How to operate the GP-MPPT Solar Controller 20-85 Battery Charging Profile Chart NOTE: Values before and after the slash correspond to 12 and 24 V systems respectively. LED Display Start Up When GP-MPPT-85/20 is connected to the battery bank, the controller will start a power up mode which takes se…
How to install and mount the GP-MPPT Solar Controller 20-85 Choosing a Location The GP-MPPT-85/20 is designed to be mounted vertically. Allow at least 2in (5cm) of space around GP-MPPT-85/20 for cooling. Install on non-flammable surface. Do not install in direct sunlight. The GP-MPPT-85/20 should be: • M…
Before a problem is suspected with the system, read this section. There are numerous events that may appear as problems but are in fact perfectly normal. Troubleshooting Problems is split into four sub-sections, grouped by symptoms involving key components. Components considered irrelevant in a diagnosis are denoted …