Solar All Electric Kits - CABLE ENTRY PLATE(S) INSTALLATION 2
1. Remove the sealing caps from the ends of the MC4 connectors in the CEP(s). 2. For the SOLAR-AE6 kit, connect the positive and negative connectors from one string of solar panels to the CEP. Connect the second string of solar panels to the second CEP. ( See Figure 5-E ). 3. For the SOLAR-AE4 kit, connect the …
Solar All Electric Kits - CABLE ENTRY PLATE(S) INSTALLATION
1. Use the included tie-wraps to secure the cables together approximately every 5’. ( See Fig 4-B to 4-E below ) NOTE : * This helps reduce the amount of electrical noise radiated by the kit. * Ensure these paired cables run through the same hole(s) as they are routed through the interior of the RV. 2. Mark the l…
