IC Series Inverter/Charger: GROUNDING THE INVERTER - AC GROUNDING
HOW TO GROUND THE INVERTER The IC Series Inverter/Charger should always be connected to a permanent, grounded wiring system. An Inverter/Charger system that is properly grounded will reduce the risk of electric shock, and reduce radio frequency noise. The main aim of any grounding system is to provide a well defin…
IC Series Inverter Charger: BASIC SETUP
BASIC SETUP Start the inverter first before plugging into shore power. If shore power is plugged in before the inverter is booted, if shore power is lost, the inverter will shut down. Standby Mode If the on/off switch on the inverter is applied when plugged into shore power and shore power is lost, the inverter …
IC Series Inverter/Charger: IC SERIES FAULT CONDITIONS
IC SERIES FAULT CONDITIONS The IC Series is protected against fault conditions and in normal use it will be rare to see any. If a fault condition does occur, the Inverter/Charger will shut down as a safety measure to protect itself, the battery bank, and the AC loads. The following fault conditions could be the …
IC Series Inverter/Charger: GENERAL OPERATING NOTES
GENERAL OPERATIONS INSTRUCTIONS ON/OFF SWITCH When the Inverter/Charger is first connected to the battery bank, the ON/OFF switch must be lightly pressed to turn the Inverter ON. Once the Inverter has been turned ON, pressing the ON/OFF switch turns the Inverter on and off. WARNING : The ON/OFF switch does not t…
