IC 2000/3000 with low-cost lithium batteries
Problem Description: When charging low-cost lithium batteries, the IC shuts down and indicates Over Voltage Protection (OVP) error. Background: The IC2000 and IC3000 inverter chargers use low-frequency electronics to convert the DC power stored within a battery (direct current, 12V) into AC power (alternating curr…
IC Series Inverter/Charger: REQUIRED TOOLS AND MATERIALS
Required Tools a. 13mm or adjustable wrench b. Screwdriver (Phillips & Flathead) c. Wire strippers and cutters d. Electric hand drill and drill bits Optional Tools e. Keyhole saw f. Pencil or marker g. Pliers h. Caulking gun i. Sealant j. Digital multimeter k. Torque driver l. Butt splice crimping tool …
IC Series Inverter/Charger: UNIT ACCESSORIES
The IC Series Inverter/Charger has two accessories available: * IC Series remote (not included). * Battery temperature sensor (included). IC Series Remote This remote control device can be used for monitoring the performance of the unit. It is also used to program certain settings on the Inverter, Charger, and …
IC Series Inverter/Charger: PREPARING THE DC CABLES
PREPARING THE DC CABLES Go Power! supplies 2 ring lugs with the IC Series, which can be used for the Inverter/Charger end of the DC Cables. Source the correct ring terminals for the batteries you are using. * Cut the negative and positive cables to the required length. * Strip off enough insulation so you can i…
IC Series Inverter Charger: DC CABLE CONNECTIONS
DC CABLE CONNECTIONS DIAGRAMS When installing the battery cable ring lug onto the Inverter/Charger DC terminal and the battery post, do not put anything between the ring lug and the metal surface. Incorrectly installed hardware causes a high resistance connection which could lead to poor Inverter/Charger performan…
IC Series Inverter/Charger: AC POWER SOURCE TYPES
TYPES OF AC POWER SOURCE AC Input power to the IC Series can be supplied from a split-phase or dual-input single phase AC source. These sources typically include utility power or a generator. • Split Phase : This source has 4 lines: 2 Hot Lines, one neutral and one ground. The 2 hot lines are 120VAC and are 180 …
