IC Series Inverter/Charger: REQUIRED TOOLS AND MATERIALS
Required Tools a. 13mm or adjustable wrench b. Screwdriver (Phillips & Flathead) c. Wire strippers and cutters d. Electric hand drill and drill bits Optional Tools e. Keyhole saw f. Pencil or marker g. Pliers h. Caulking gun i. Sealant j. Digital multimeter k. Torque driver l. Butt splice crimping tool …
IC Series Inverter/Charger: UNIT ACCESSORIES
The IC Series Inverter/Charger has two accessories available: * IC Series remote (not included). * Battery temperature sensor (included). IC Series Remote This remote control device can be used for monitoring the performance of the unit. It is also used to program certain settings on the Inverter, Charger, and …
IC Series Inverter Charger: GENERAL INFORMATION
2.1 CAUTIONS/WARNINGS This document contains important safety instructions for the products produced by Go Power! Read all instructions and cautionary markings on the product and on any accessories or additional equipment included in the installation. Failure to follow these instructions could result in severe sho…
IC Series Inverter/Charger: MOUNTING THE INVERTER/CHARGER
HOW TO MOUNT THE INVERTER/CHARGER Before connecting any wires to the Inverter/Charger the unit must be mounted securely in a location which meets the requirements detailed in section 3.2. The GP-IC-2000 weighs: 39 lbs (17.6kg). The GP-IC-3000 weighs: 52lbs (23.6kg). Take the necessary precautions required whilst …
IC Series Inverter/Charger: WARNING LABELS
WARNING LABELS When an Inverter/Charger is installed in a building the National Electrical Code (NEC) requires a label or plaque to be provided. This label/plaque is required to be easily visible and to inform users of the location of all electrical system disconnects. Buildings with stand-alone power systems (sol…
IC Series Inverter/Charger: PREPARING THE DC CABLES
PREPARING THE DC CABLES Go Power! supplies 2 ring lugs with the IC Series, which can be used for the Inverter/Charger end of the DC Cables. Source the correct ring terminals for the batteries you are using. * Cut the negative and positive cables to the required length. * Strip off enough insulation so you can i…
IC Series Inverter Charger: DC CABLE CONNECTIONS
DC CABLE CONNECTIONS DIAGRAMS When installing the battery cable ring lug onto the Inverter/Charger DC terminal and the battery post, do not put anything between the ring lug and the metal surface. Incorrectly installed hardware causes a high resistance connection which could lead to poor Inverter/Charger performan…
IC Series Inverter/Charger: INVERTING MODE
In inverting mode: * The load power required by the appliances (fridge, TV, charger) is 2000W (16.7AAC x 120VAC) - 1. * The inverter supplies the 2000W or 3000W (186 ADC x 12VDC x 0.9) of AC power required to power the appliances - 2. * Shore power (utility or generator) is not connected.
