Cleaning The lithium batteries are maintenance-free. Occasionally clean the product with a damp cloth. Storage Battery is shipped in shutdown mode, and SOC is about 30% by air shipment, about 50% SOC by sea shipment. The storage environment requirement is as follows: Storage Temperature range ℃ (At 50% SO…
Disposal Recycling products with batteries, rechargeable batteries and light sources: Remove any batteries, rechargeable batteries, and light sources before recycling the product. Return defective or used batteries to your retailer or dispose of them at collection points. Do not dispose of any batteries, rechargea…
The advanced LiFePO4 battery offers the desired features like charging below freezing, series connected batteries as well as BLE and RV-C connectivity. The batteries are equipped with a Battery Management System (BMS) which is built in the battery housing. The battery management system is a non-power consuming, passi…
The 300 Ah battery has the following components: 1 Power button with status LED 2 RV-C ports 3 Removable top lid for serviceability 4 Optional brackets for easy mounting to a wall 5 Handles clip into battery for neater storage 6 Integrated screw holes for easy mounting NOTE: Easy mounting works we…
Click here to view Quick Start Guide
Charging > Charging current should be less than maximum charging current. > Charging voltage should be less than 14.6 V. Charging beyond this absolute maximum voltage is strictly prohibited. > The battery should be charged within the charging temperature range. Reverse charging is prohibited. > The battery shou…
Explore the technical specifications and features of our 100 Ah and 300 Ah lithium batteries, including voltage, capacity, temperature ranges, and more. For the below table, all items are minimum performance values and “must have” UNLESS indicated otherwise. 100 Ah 300 Ah Nominal voltage 12.8 V Nominal capa…
The 100 Ah battery has the following components: 1 Power button with status LED 2 RV-C Ports 3 Integrated heater for low temperature charging 4 Slanted sides prevent batteries from being installed without an air gap between them for cooling 5 Integrated screw holes for easy mounting. This works well fo…
Basic Operation and Initial Powerup Various Power Modes: * Power On Mode: From fully off , press and hold the power button on any of the batteries and wait till all battery LEDs turn on then release. All batteries will then transition to "Power ON" mode. * Sleep / Storage Mode: Disable output power / discharg…
* Download the Go Power Connect! app * Fully power off all batteries (or single battery). If multiple batteries are used: Connect all batteries with the proper communication cables. The following cables are shown below: Cable 2: Is primarily used to connect multiple batteries together. You will ne…