IC Series Inverter/Charger: INVERTING MODE
In inverting mode: * The load power required by the appliances (fridge, TV, charger) is 2000W (16.7AAC x 120VAC) - 1. * The inverter supplies the 2000W or 3000W (186 ADC x 12VDC x 0.9) of AC power required to power the appliances - 2. * Shore power (utility or generator) is not connected.
IC Series Inverter/Charger: GENERAL WIRING SPECIFICATIONS
GENERAL WIRING SPECIFICATIONS The following sections detail how the IC Series Inverter/Charger should be wired. Before starting any wiring, read and understand these instructions. Wiring should meet all local codes and standards and be performed by qualified personnel such as a licensed electrician. The NEC (Nat…
IC Series Inverter/Charger: AC POWER SOURCE TYPES
TYPES OF AC POWER SOURCE AC Input power to the IC Series can be supplied from a split-phase or dual-input single phase AC source. These sources typically include utility power or a generator. • Split Phase : This source has 4 lines: 2 Hot Lines, one neutral and one ground. The 2 hot lines are 120VAC and are 180 …
IC Series Inverter/Charger: LOCATION AND ENVIRONMENTAL REQUIREMENTS
LOCATION AND ENVIRONMENTAL REQUIREMENTS The IC Series Inverter/Charger must be installed in a location that meets the following requirements: 1. TEMPERATURE Make sure the Inverter/Charger is installed in a location where the normal air temperature is between 0 °C and 50 °C. The cooler the better within this …
IC Series Inverter/Charger: DC WIRE SIZING
DC WIRE SIZING SPECIFICATIONS The distance between the battery bank and the Inverter/Charger should be as short as possible to achieve maximum efficiency and to reduce fire hazards. The cables should be as short as possible and the overall length of both cables added together should be less than 10 ft (3m) to comp…
IC Series Inverter/Charger: AC WIRING
AC WIRING INSTRUCTIONS The AC cables link the Inverter/Charger to the main panel and the sub panel. These cables handle the incoming alternating current (AC) utility or generator power, which can be passed through the Inverter/Charger to directly power the main appliances (pass-through mode) and/or used to charge …
IC Series Inverter/Charger: POWER SHARING MODE 1
POWER SHARING MODE In power sharing mode: * The power required by the appliances (fridge, TV, charger) is 4200W (35AAC x 120VAC) - 1. * Shore power (Utility or Generator) is connected and supplying 6000W (50AAC x 120VAC) - 2. * 4200W of AC power is passed through OUT 1 on the Inverter/Charger to power the ap…
IC Series Inverter/Charger: BATTERY TEMPERATURE SENSOR (BTS) OPERATION
BATTERY TEMPERATURE SENSOR (BTS) OPERATION The IC Series Inverter/Charger is delivered with a battery temperature sensor. By installing this sensor, the charge voltages are automatically adapted for deviating temperature. With a BTS installed, if the temperature around the BTS is below 20°C, the absorb and float c…
